Figure 23-10 Menu 27.1.1.2 - Manual Setup; Table 23-7 Menu 27.1.1.2 - Manual Setup - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

ZyWALL 50 Internet Security Gateway
FIELD
Press [SPACE BAR] to choose from ESP Tunnel, ESP Transport, AH
Active Protocol
Tunnel or AH Transport and then press [ENTER]. Choosing an ESP
combination causes the AH Setup fields to be non-applicable (N/A)
ESP Setup The ESP Setup fields are N/A if you chose an AH Active Protocol.
SPI The SPI must be from one to four unique decimal characters ("0" to "9")
long.
Encryption Press [SPACE BAR] to choose from 3DES or DES and then press
[ENTER]. Fill in the Key1 field below when you choose DES and fill in
Algorithm
fields Key1 to Key3 when you choose 3DES.
Key1 The key must be unique and eight characters long. Any character may
be used, including spaces, but trailing spaces are truncated.
Fill in the Key1 field when you choose DES and fill in fields Key1 to
Key3 when you choose 3DES.
Key2 The key must be unique, eight characters long and can be comprised
of any character including spaces (but trailing spaces are truncated).
Key3 The key must be unique, eight characters long and can be comprised
of any character including spaces (but trailing spaces are truncated).
Authentication Press [SPACE BAR] to choose from MD5 or SHA1 and then press
Al ith [ENTER]
23-16
Menu 27.1.1.2 – Manual Setup
Active Protocol= ESP Tunnel
ESP Setup
SPI=
Encryption Algorithm= DES
Key1=
Key2=
Key3=
Authentication Algorithm= MD5
Key= N/A
AH Setup
SPI (Decimal)= N/A
Authentication Algorithm= N/A
Key=
Press ENTER to Confirm or ESC to Cancel:
Figure 23-10 Menu 27.1.1.2 — Manual Setup
Table 23-7 Menu 27.1.1.2 — Manual Setup
DESCRIPTION EXAMPLE
ESP Tunnel
1234
DES
89abcde
MD5
VPN/IPSec Setup