Table 10-4 Adding/Editing Source and Destination Addresses
FIELD
Address Type
Do you want your rule to apply to packets with a particular
(single) IP address, a range of IP addresses (e.g., 192.168.1.10
to 192.169.1.50), a subnet or any IP address? Select an option
from the drop down list box
Start IP Address
Enter the single IP address or the starting IP address in a range
here.
End IP Address
Enter the ending IP address in a range here.
Subnet Mask
Enter the subnet mask here, if applicable.
When you have finished, click Apply to save your customized settings and exit this screen, Cancel to
exit this screen without saving, or Help for online HTML help on fields in this screen.
10.6 Timeout
The fields in the Timeout screens are the same for Local and Internet networks, so
10.6.1 Factors Influencing Choices for Timeout Values
The factors influencing choices for timeout values are the same as the factors influencing choices for
threshold values – see section 9.4.1. Click on either Local Network or Internet, then select the Timeout tab.
Creating Custom Rules
DESCRIPTION
the discussion below refers to both.
ZyWALL 50 Internet Security Gateway
Single Address
Range Address
Subnet Address
Any Address
OPTIONS
10-13