Call-Triggering Packet; Ppp Log - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

ZyWALL 50 Internet Security Gateway

4. PPP log

PPP Log Message Format
sdcmdSyslogSend( SYSLOG_PPPLOG, SYSLOG_NOTICE, String );
String = ppp:Proto Starting / ppp:Proto Opening / ppp:Proto Closing / ppp:Proto Shutdown
Proto = LCP / ATCP / BACP / BCP / CBCP / CCP / CHAP/ PAP / IPCP /
IPXCP
Jul 19 11:42:44 192.168.102.2 ZyXEL: ppp:LCP Closing
Jul 19 11:42:49 192.168.102.2 ZyXEL: ppp:IPCP Closing
Jul 19 11:42:54 192.168.102.2 ZyXEL: ppp:CCP Closing
5. Firewall log
Firewall Log Message Format
sdcmdSyslogSend(SYSLOG_FIREWALL, SYSLOG_NOTICE, buf);
buf = IP[Src=xx.xx.xx.xx : spo=xxxx Dst=xx.xx.xx.xx : dpo=xxxx | prot | rule | action]
Src: Source Address
spo: Source port (empty means no source port information)
Dst: Destination Address
dpo: Destination port (empty means no destination port information)
prot: Protocol ("TCP","UDP","ICMP", "IGMP", "GRE", "ESP")
rule: <a,b> where a means "set" number; b means "rule" number.
action: nothing(N) block (B) forward (F)
08-01-2000 11:48:41 Local1.Notice
>172.21.1.80 :137 |UDP|default permit:<2,0>|B
08-01-2000 11:48:41 Local1.Notice
|UDP|default permit:<2,0>|B
08-01-2000 11:48:39 Local1.Notice
|IGMP<2>|default permit:<2,0>|B
08-01-2000 11:48:39 Local1.Notice
|IGMP<2>|default permit:<2,0>|B

17.3.3 Call-Triggering Packet

Call-Triggering Packet displays information about the packet that triggered a dial-out call in an easy
readable format. Equivalent information is available in menu 24.1 in hex format. An example is shown
next.
17-10
192.168.10.10
192.168.10.10 RAS: FW 192.168.77.88 :520 ->192.168.77.88 :520
192.168.10.10
192.168.10.10
RAS: FW 172.21.1.80 :137 -
RAS: FW 172.21.1.50 ->172.21.1.50
RAS: FW 172.21.1.25 ->172.21.1.25
System Information & Diagnosis