Wan Dhcp; Figure 17-10 Menu 24.4 - System Maintenance - Diagnostic - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

ZyWALL 50 Internet Security Gateway
TCP/IP
1.
2.
3.
4.
System
11. Reboot System
Figure 17-10 Menu 24.4 — System Maintenance — Diagnostic
Follow the procedure below to get to Menu 24.4 - System Maintenance – Diagnostic.
Step 1.
From the main menu, select option 24 to open Menu 24 - System Maintenance.
Step 2.
From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.

17.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in Figure 17-11. LAN DHCP has
already been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address Assignment
field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet)
or None, i.e., you have a static IP. The WAN Release and Renewal fields in menu 24.4 conveniently allow
you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a fashion
similar to winipcfg.
17-12
Menu 24.4 - System Maintenance - Diagnostic
Ping Host
WAN DHCP Release
WAN DHCP Renewal
4. Internet Setup Test
Enter Menu Selection Number:
Host IP Address= N/A
System Information & Diagnosis