Figure 4-3 Menu 11.1 - Remote Node Profile For Pptp Encapsulation; Table 4-3 Fields In Menu 11.1 (Pptp Encapsulation) - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

ZyWALL 50 Internet Security Gateway
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name=N/A
Outgoing=
My Login=
My Password= ********
Authen= CHAP/PAP
PPTP :
My IP Addr=
Server IP Addr=
Connection ID/Name=
Press Space Bar to Toggle.
Figure 4-3 Menu 11.1 — Remote Node Profile for PPTP Encapsulation
The next table shows how to configure fields in menu 11.1 not previously discussed above.

Table 4-3 Fields in Menu 11.1 (PPTP Encapsulation)

FIELD
Toggle the space bar to choose PPTP. You must also go to menu
Encapsulation
11.3 to check the IP Address setting once you have selected the
encapsulation method.
My IP Addr Enter the IP address of the WAN Ethernet port.
My Server IP Enter the IP address of the ANT modem.
Addr
Connection Enter the connection ID or connection name in the ANT. It must
ID/Name follow the "c:id" and "n:name" format.
This field is optional and depends on the requirements of your xDSL
Modem.
Schedules You can apply up to four schedule sets here. For more details
please refer to the Call Schedule Setup chapter.
Nailed-Up Press [SPACE BAR] and then [ENTER] to select Yes if you want to
Connections make the connection to this remote node a nailed-up connection.
4-6
Menu 11.1 - Remote Node Profile
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-up Connections= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION EXAMPLE
PPTP
10.0.0.140
10.0.0.138
n:My ISP
No
Remote Node Setup