Wan Setup - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

FIELD
Host Enter the domain name assigned to your ZyWALL by your
Dynamic DNS provider.
EMAIL Enter your e-mail address.
USER Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard Your ZyWALL supports DYNDNS Wildcard. Press [SPACE BAR]
and then [ENTER] to select Yes or No This field is N/A when
you choose DDNS client as your service provider.
This field is only available when CustomDNS is selected in the
Offline
DDNS Type field. Press [SPACE BAR] and then [ENTER] to
select Yes. When Yes is selected, traffic is redirected to a URL
that you have previously specified (see www.dyndns.org for
details).
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
The IP address will be updated when you reconfigure menu 1 or perform DHCP client renewal.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
4.3

WAN Setup

This section describes how to configure the WAN using Menu 2 — WAN Setup. From the main menu,
enter 2 to open menu 2.
ZyXEL recommends you configure this menu even if your ISP does not require
General and WAN Setup
DESCRIPTION
MAC address authentication.
ZyWALL 50 Internet Security Gateway
EXAMPLE
me.dyndns.org
mail@mailserver
No
Yes
4-3