ZyWALL 50 Internet Security Gateway
Step 1.
Activate the firewall. You may activate the firewall through the web configurator as shown next
(click Configuration, the Config tab, then click the Firewall Enabled check box) or through
SMT menu 21.2. You can only configure the firewall using the web configurator or CI commands
(see Appendices). When the firewall is active, the default rules allow all traffic from the local
network to the WAN (Internet) and block all traffic from the Internet to the local network.
13-2
Check here to activate the
firewall. You may also
activate the firewall in SMT
menu 21.2.
Figure 13-1 Activate the Firewall
Example Firewall Rules