ZyXEL Communications ZyXEL ZyWALL 50 User Manual page 313

ZyWALL 50 Internet Security Gateway
FUNCTION
rule
<rule #> alert <yes | no>
config edit firewall set <set #>
rule
<rule #> srcaddr-single <ip
address>
config edit firewall set <set #>
rule
<rule #> srcaddr-subnet <ip
address>
<subnet mask>
config edit firewall set <set #>
rule
<rule #> srcaddr-range <start ip
address> <end ip address>
config edit firewall set <set #>
rule
<rule #> destaddr-single <ip
address>
config edit firewall set <set #>
rule
<rule #> destaddr-subnet <ip
address>
<subnet mask>
config edit firewall set <set #>
rule
<rule #> destaddr-range <start ip
address> <end ip address>
config edit firewall set <set #>
rule
<rule #> TCP destport-single
<port #>
config edit firewall set <set #>
rule <rule #> TCP destport-range
<start port #> <end port #>
P
CLI SYNTAX DESCRIPTION
DOS attack occurs or there is a violation of any alert
settings. In case of such instances, the function will send an
e-mail to the SMTP destination address and log an alert.
Selects and edits a source address of the traffic which
comply to this rule.
Selects and edits a source address and subnet mask of
traffic which comply to this rule.
Selects and edits a source address range of traffic which
comply to this rule.
Selects and edits a destination address of the traffic which
comply to this rule.
Selects and edits a destination address and subnet mask of
traffic which comply to this rule.
Selects and edits a destination address range of traffic
which comply to this rule.
Selects and edits the destination port of the traffic which
comply with this rule. For non-consecutive port numbers,
the user may repeat this command line to enter in the
multiple port numbers.
Selects and edits a destination port range of traffic which
comply to this rule.
Firewall CLI Commands