ZyWALL 50 Internet Security Gateway
Chapter 20
Remote Management
This chapter covers remote management found in SMT menu 24.11.
20.1 Telnet
The only way to configure the ZyWALL for remote management is through an SMT session using the
console port. Once your ZyWALL is configured, you can use telnet to configure it remotely as shown next.
Figure 20-1 Telnet Configuration on a TCP/IP Network
20.2 FTP
You can upload and download ZyWALL firmware and configuration files using FTP - please see Chapter
18 for details. To use this feature, your computer must have an FTP client.
Remote Management
20-1