Figure 15-16 Filtering Remote Node Traffic - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

numbers separated by commas. The factory default filter set, NetBIOS_WAN, can be applied in menu 11.5
to block local NetBIOS traffic from triggering calls to the ISP (when you are using PPPoE or PPTP
encapsulation only). Enter 1 in protocol filters under Output Filter Sets when using Ethernet
encapsulation, and in the protocol filters field under Call Filter Sets when using PPPoE or PPTP
encapsulation. Apply them as shown in the following figure.
Filter Configuration
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters= 1
device filters=
Call Filter Sets:
protocol filters= 1
device filters=
Enter here to CONFIRM or ESC to CANCEL:

Figure 15-16 Filtering Remote Node Traffic

ZyWALL 50 Internet Security Gateway
Apply Default
Filter 1. Enter 1 in
protocol filters under
Output Filter Sets
when using Ethernet
encapsulation and under
Call Filter Sets when
using PPPoE or PPTP
Encapsulation.
15-19