C
H A P T E R
13.1 Overview
This chapter explains how to configure the TR-069 settings on the ZyXEL Device.
13.1.1 What You Can Do in this Chapter
The TR-069 Client screen lets you configure the ZyXEL Device's TR-069 auto-configuration
settings
(Section 13.2 on page
13.2 The TR-069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your ZyXEL Device,
can be managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on
sending Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent
in Extensible Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the ZyXEL Device, modify settings,
perform firmware upgrades as well as monitor and diagnose the ZyXEL Device. You have
enable the device to be managed by the ACS and specify the ACS IP address or domain name
and username and password.
Click Advanced > Remote MGMT to open the following screen. Use this screen to configure
your P-870HA to be managed by an ACS.
P-870HW-51a v2 User's Guide
Remote Management
129).
13
129