Figure 4-6 Menu 11.5 - Remote Node Filter (Ethernet Encapsulation); Figure 4-7 Menu 11.5 - Remote Node Filter (Pppoe Or Pptp Encapsulation) - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote
node and the ZyWALL to prevent certain packets from triggering calls. You can specify up to 4 filter sets
separated by commas, e.g., 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this field. For
more information on defining the filters, please refer to the Filters chapter. For PPPoE or PPTP
encapsulation, you can also specify remote node call filter sets.
Figure 4-6 Menu 11.5 — Remote Node Filter (Ethernet Encapsulation)
Figure 4-7 Menu 11.5 — Remote Node Filter (PPPoE or PPTP Encapsulation)
Remote Node Setup
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters= 1
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 3
Device filters=
Output Filter Sets:
protocol filters= 1
device filters=
Call Filter Sets:
protocol filters= 1
Device filters=
Enter here to CONFIRM or ESC to CANCEL:
ZyWALL 50 Internet Security Gateway
4-11