Bw Mgmt Monitor Window - ZyXEL Communications P-2302R-P1 Series User Manual

P-2302R-P1 Series User's Guide
Table 26 VoIP Statistics Window
LABEL
Hook
Status
Codec
Peer Number
Duration
Tx Pkts
Rx Pkts
Tx B/s
Rx B/s
Poll Interval
Set Interval
Stop

5.5 BW MGMT Monitor Window

To access this screen, open the Status screen (see
...) next to BW MGMT Monitor.
78
DESCRIPTION
This field indicates whether the phone is on the hook or off the hook.
On - The phone is hanging up or already hung up.
Off - The phone is dialing, calling, or connected.
This field displays the current status of each call.
DIAL - The ZyXEL Device is dialing the current call.
RING - The phone is ringing because there is an incoming call.
Process - The call is connected and in process.
DROP - The ZyXEL Device is hanging up (disconnecting) the current call.
DISC - The ZyXEL Device has hung up.
N/A - There is no phone connected to this phone port.
This field displays the type of voice compression used in the current call.
If the current call is a peer-to-peer call, this field displays the SIP number of the
other party. Otherwise, it displays N/A.
This field displays how long the current call has lasted.
This field displays the number of packets the ZyXEL Device has transmitted in the
current call.
This field displays the number of packets the ZyXEL Device has received in the
current call.
This field displays how quickly the ZyXEL Device has transmitted packets in the
current call. The rate is the number of kilobits transmitted one second before the
last time the screen updated (refreshed).
This field displays how quickly the ZyXEL Device has received packets in the
current call. The rate is the number of kilobits received one second before the last
time the screen updated (refreshed).
Enter how often you want the ZyXEL Device to update this screen, and click Set
Interval.
Click this to make the ZyXEL Device update the screen based on the amount of
time you specified in Poll Interval.
Click this to make the ZyXEL Device stop updating the screen.
Section 5.1 on page 71), and click (Details
Chapter 5 Status Screens