Linux; Figure 142 Red Hat 9.0: Kde: Network Configuration: Devices - ZyXEL Communications MAX-200M1 Series User Manual

6 Restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.

Figure 142 Red Hat 9.0: KDE: Network Configuration: Devices

2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
Appendix C
ZyXEL MAX-200M1 Series User's Guide
233