Table of Contents
Advertisement
Chapter 9 Maintenance
Remote Management and NAT
When NAT is enabled:
• Use the WiMAX Device's WAN IP address when configuring from the WAN.
• Use the WiMAX Device's LAN IP address when configuring from the LAN.
System Timeout
There is a default system management idle timeout of five minutes. The WiMAX
Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when
a statistics screen is polling.
SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the
TCP/IP protocol suite. Your WiMAX Device supports SNMP agent functionality,
which allows a manager station to manage and monitor the WiMAX Device
through the network. The WiMAX Device supports SNMP version one (SNMPv1)
and version two (SNMPv2). The next figure illustrates an SNMP management
operation.
Note: SNMP is only available if TCP/IP is configured.
114
MAX208M User's Guide
Advertisement
Table of Contents
