Remote Management And Nat; System Timeout; Telnet; Figure 13-1 Telnet Configuration On A Tcp/Ip Network - ZyXEL Communications ZyAIR User Manual

Wireless gateway series
Hide thumbs Also See for ZyAIR:
Table of Contents

Advertisement

ZyAIR Wireless Gateway Series User's Guide
5. There is already another remote management session of the same type (web, FTP or Telnet)
running. You may only have one remote management session of the same type running at one time.
6. There is a web remote management session running with a Telnet session. A Telnet session will be
disconnected if you begin a web session; it will not begin if there already is a web session.

13.1.2 Remote Management and NAT

When NAT is enabled:
Use the ZyAIR's WAN IP address when configuring from the WAN.
Use the ZyAIR's LAN IP address when configuring from the LAN.

13.1.3 System Timeout

There is a system timeout of five minutes (three hundred seconds) for either the console port or
telnet/web/FTP connections. Your ZyAIR automatically logs you out if you do nothing in this timeout
period, except when it is continuously updating the status in menu 24.1 or when sys stdio has been
changed on the command line.

13.2 Telnet

You can telnet into the ZyAIR to perform remote management.
13-2

Figure 13-1 Telnet Configuration on a TCP/IP Network

Remote Management

Advertisement

Table of Contents
loading

Table of Contents