Site Preparation; Electrical Connections; Protective Earth Grounding; Initial Setup - Thermo Scientific HyPerforma DS 300 User Manual

Chapter 2 | Setup and operating information
Thermo Scientific

2.1 Site preparation

2.1.1 Electrical connections

The DS 300 S.U.M. unit can be used on circuits equipped with
GFCI circuit protection. The unit is equipped with a plug connection
appropriate to specific countries.

2.1.2 Protective earth grounding

Protective earth grounding for the S.U.M. system and controller
is provided through the ground terminal of the plug providing the
power. Source power to the controller must provide protective earth
grounding to this terminal in order to minimize the hazard of a possible
shock in case of a fault condition.

2.2 Initial setup

The DS 300 S.U.M. will arrive with the following items:
• Docking station mixer unit
• Handheld control device
• Motor and mount
• Optional drum positioner
• Drive shafts (customer specified)
• Torque and spanner wrenches
• Equipment Turnover Package (ETP), the standard or detailed
documentation package (if ordered), located on the USB drive
provided with the equipment
DS 300 drums will arrive with the following items:
• Outer support container or drum
• Drum dolly
Hardware uncrating
The DS 300 S.U.M. will arrive crated. Follow the provided unpacking
instructions (DOC0010) in addition to the following instructions.
Note: When uncrating hardware, retain all packing materials for
possible future use.
HyPerforma DS 300 Single‑Use Mixer User's Guide | 16