Thermo Scientific HyPerforma DS 300 User Manual page 21

Chapter 2 | Setup and operating information
Figure 2.3. Removing the
strap securing the mixer to
the top of the crate
Figure 2.4. Removing the
bottom strap
Thermo Scientific
3. Remove the drive shafts from the crate and set them aside.
Depending on the size and number of drive shafts ordered, they
may be secured to the bottom of the crate. Longer drive shafts will
be secured upright in a front corner of the crate.
4. Remove the uncrating instructions from the plastic sleeve affixed
to the inside wall of the crate.
5. Remove the small cardboard box containing the tools. Unwrap the
tools and set them aside.
6. Remove the strap that secures the mixer to the top of the crate
(Figure 2.3).
7. Remove the strap that secures the mixer to the eyes screwed into
the bottom of the crate (Figure 2.4).
HyPerforma DS 300 Single‑Use Mixer User's Guide | 18