Thermo Scientific HyPerforma DS 300 User Manual page 23

Chapter 2 | Setup and operating information
Figure 2.8. Hanging the
handheld control device on
the hook
Figure 2.9. Motor head
rotation (optional)
Thermo Scientific
11. If your unit is equipped with the optional rotating motor head,
rotate the motor into working position (Figure 2.9). See section
2.6.3 of this guide for more information about adjusting the
rotating motor head.
12. Inspect the unit to ensure that no damage occurred during
shipping. Contact your sales representative immediately if damage
has occurred.
13. Place all packaging and shipping materials back into the crate for
possible future use.
14. Place the bearing hub, torque wrench, and spanner wrench
into the appropriate storage holes on the docking station unit.
Place the drive shaft(s) in the appropriate storage holder(s) on the
docking station.
HyPerforma DS 300 Single‑Use Mixer User's Guide | 20