Chapter 4
|
Specifications and part numbers
Figure 4.7. Reusable bearing
hub for open‑top liners
Figure 4.8. Impeller, sleeve,
and connector for open‑top
liners
Thermo Scientific
Table 4.9. Reusable bearing hub (for open‑top liners) part number.
Size
50–300 L
Table 4.10. Impeller, sleeve, and connector (for open‑top liners) part
numbers.
Drum size
Description
Impeller, sleeve, and connector for
50 L
66 cm (26 in.) drive shaft
Impeller, sleeve, and connector for
100 L
83.8 cm (33 in.)
Impeller, sleeve, and connector for
200 L
108 cm (42.5 in.)
Impeller, sleeve, and connector for
300 L
129.5 cm (51 in.)
Description
Reusable bearing hub
Sleeve length
35.3 cm (13.9 in.)
53.1 cm (20.9 in.)
77 cm (30.3 in.)
96 cm (37.8 in.)
HyPerforma DS 300 Single‑Use Mixer User's Guide
Cat. no.
SV50177.77
Cat. no.
SH30749.11
SH30749.12
SH30749.13
SH30749.08
|
47