Displaying Information About The Hmi Device - Siemens SIMATIC HMI Operating Instructions Manual

Result
The HMI device starts.
See also
Setting the date and time (Page 147)
Enabling PROFINET IO (Page 165)
Overview (Page 128)
6.6.8

Displaying information about the HMI device

Introduction
You will need the device-specific information if you contact A&D Technical Support.
Requirements
You have opened the "OP Properties" dialog box, "Device" tab, by touching the "OP"
icon.
①
②
③
④
⑤
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
– If no projects are active on the HMI device, it will restart immediately.
– If a project is active on the HMI device, it will output several prompts. After you have
acknowledged these prompts, the HMI device will restart.
HMI device name
Version of the HMI device image
Version of the boot loader
Boot loader release date
Size of the internal flash memory in which the HMI device image and project are stored
Configuring the operating system
6.6 Changing HMI device settings
157