Activating Or Deactivating The Key Pad Lock (With A Pin); Activating Or Deactivating The Key Tone - Infors HT Multitron Operating Manual

7.7.5

Activating or Deactivating the Key Pad Lock (with a PIN)

7.7.6

Activating or Deactivating the Key Tone

20 August 2020
INFORMATION
When opening the door of the device, the table is stopped with
the maximum brake force, regardless which brake force is set.
OPt PIN
Top display: and
To prevent unauthorised persons making entries on the operating
panel, the key pad can be locked using a PIN. To do so, tap the SET
Setpoint
key (the sign appears) and then use the ON/OFF key to acti-
vate or deactivate the key pad lock.
If the key pad lock has been activated, you can then tap the OPTION
key followed by the SET key to enter a PIN (number between 0 and
9999). Once the PIN has been entered, this must be confirmed using
the ON/OFF key (the message
INFORMATION
By entering the number "1756" (Super PIN), the PIN is deactivated
and set to zero.
INFORMATION
When the key pad lock is active, this information can be read out
via the Ethernet interface. In this way, when the device is remotely
controlled (e.g. using eve
whether the key pad lock is active or not.
bEEP
Top display:
The key tone (clicking sound when tapping a key) can be activated or
deactivated. To do so, tap the SET key (the sign
and then use the ON/OFF key to activate or deactivate the key tone.
Multitron - Operating Manual
PIN OK
appears on the top display).
® ), it can be determined and logged
Setpoint
Operation
appears)
Page 113 of 158