Table of Contents
Advertisement
Multitron - Operating Manual
Operation
Page 110 of 158
Requirements
To ensure the device can be operated via the Ethernet interface, the
function must be activated in the settings menu. Here, you can
choose between the options
(see chapter 7.7.9 "Setting up Data Exchange via Ethernet", page
115).
Displays on the device
If the device is controlled using eve
follows:
While the device is being registered in eve
1
ing of the device is flashing. This is used, in particular, to iden-
tify the unit in case of stacked devices.
The white dot at the bottom right of the operating panel (3)
2
lights up if the Ethernet connection has been recognised (cable
connected and IP address received from DHCP).
The white dot (3) flashes at four-second intervals if the connec-
tion to the device was interrupted or the device was not regis-
tered in eve
®
If setpoints are written to the device, the red symbol
(2) lights up on the display field.
If a parameter has been deactivated by sending setpoint 0, this
is indicated by four dashes (1) on the operating panel.
3
on
(read only) and
, this is displayed on the device as
®
.
Auto
(read and write)
®
, the interior light-
EXTERN
20 August 2020
Advertisement
Table of Contents
Need help?
Do you have a question about the Multitron and is the answer not in the manual?
Questions and answers
how to calibrate co2 on Model: Multitron Pro # I10102.1 and also purchase the solenoid valve # 52X06150GM
What is the meaning of Throw (fixed) and adjustable
In the Infors HT Multitron, "adjustable throw" means the shaking motion can be changed by selecting one of four eccentric throw positions: 12.5 mm, 19 mm, 25 mm, or 50 mm. This allows customization of the shaking intensity for different applications. A "fixed throw" would mean the shaking motion is set to a single, unchangeable value. The Multitron supports adjustable throw, and only trained personnel are allowed to make changes to it.
This answer is automatically generated