Humidity - Switch On/Off High Alarm; Setting The Adjustable Throw - Infors HT Multitron Operating Manual

Multitron - Operating Manual
Operation
7.7.12 Humidity – Switch On/Off High Alarm

7.8 Setting the Adjustable Throw

Page 116 of 158
Top display: OPt and ALARM
Humid
Bottom display: and
Humidity
The High alarm of the
If the alarm is switched off, no alarm is triggered if the humidity ex-
ceeds the upper limit value. Since the humidity in the incubation
chamber is normally not a critical parameter that has a direct impact
on the success of the cultivation, the High alarm of the
rameter is switched off ex factory.
To switch on or off the High alarm of the
Setpoint
the SET key (the sign
key to activate or deactivate the alarm.
INFORMATION
Improper modification of the throw of a device with an adjustable
throw represents a safety risk. The throw may therefore only be
changed by personnel that has received appropriate training and
authorisations. If you have any questions, contact your local IN-
FORS HT representative (see contact details on page 2).
High
parameter can be switched on or off.
Humidity
parameter, tap
appears) and then use the ON/OFF
Humidity
pa-
20 August 2020