9.2 Cleaning and Disinfection
9.2.1
Cleaning
20 August 2020
If substances, in particular hazardous substances, are spilled in or on
the device, the device has to be cleaned and disinfected thoroughly.
Furthermore, the device should be cleaned and disinfected on a regu-
lar basis to ensure proper operation.
If there are doubts concerning the compatibility of cleaning and disin-
fection agents, contact your local INFORS HT representative (see ser-
vice contact details on page 2).
ATTENTION
Insufficient cleaning and disinfection can lead to damage to cul-
tures due to contamination.
Detergent
Mild detergents, e.g. dishwashing liquid or neutral cleaning agents,
are suitable for all surfaces:
Exterior surfaces of the casing
Front window
Interior surfaces of the casing (incl. base tray)
Steel plate covers
Table
Trays (incl. clamps and other holders)
ATTENTION
Aggressive cleaning agents, solvents and abrasive cleaning utensils
(hard sponges, brushes) can scratch surfaces, damage the device
and impair its function.
Notices on cleaning
To clean the surfaces, use a soft cloth, ideally lint-free. This applies in
particular to the front window. Disinfect using commercially available
disinfectant if necessary.
Multitron - Operating Manual
Maintenance and Cleaning
Page 129 of 158
Need help?
Do you have a question about the Multitron and is the answer not in the manual?
Questions and answers
how to calibrate co2 on Model: Multitron Pro # I10102.1 and also purchase the solenoid valve # 52X06150GM
What is the meaning of Throw (fixed) and adjustable