Installation; Operating Conditions At The Installation Location - Infors HT Multitron Operating Manual

Hide thumbs Also See for Multitron:
Table of Contents

Advertisement

Multitron - Operating Manual

Installation

6 Installation

6.1 Operating Conditions at the Installation Location

Page 72 of 158
Only the manufacturer's qualified expert personnel or persons au-
thorised by the manufacturer may install and initially commission the
device. Hence, the following section only lists the requirements for
the installation location to be observed by the provider.
WARNING
Installation and initial commissioning require trained expert per-
sonnel with sufficient experience. Errors during installation may
lead to dangerous situations or significant damage to property.
Only the manufacturer's expert personnel or person's author-
ised by the manufacturer may install and initially commission
the device.
The manufacturer must also be consulted if the device is sub-
sequently moved.
To achieve optimal and reproducible results, the device should be set
up in stable ambient conditions without strong temperature or hu-
midity fluctuations. Changes in ambient temperature or humidity
(even short-term) can have a negative effect on the climate in the
incubation chamber.
Operating conditions
Temperature range
Humidity
Restrictions
The device may only be set up indoors.
10 up to 30 °C
10 up to 85 %
Do not expose to direct sun-
light
Do not expose to dust
Do not expose to vibrations
20 August 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Multitron and is the answer not in the manual?

Questions and answers

Stephen Garcia
January 27, 2025

how to calibrate co2 on Model: Multitron Pro # I10102.1 and also purchase the solenoid valve # 52X06150GM

Srividya Murali
April 24, 2025

What is the meaning of Throw (fixed) and adjustable

1 comments:
Mr. Anderson
May 12, 2025

In the Infors HT Multitron, "adjustable throw" means the shaking motion can be changed by selecting one of four eccentric throw positions: 12.5 mm, 19 mm, 25 mm, or 50 mm. This allows customization of the shaking intensity for different applications. A "fixed throw" would mean the shaking motion is set to a single, unchangeable value. The Multitron supports adjustable throw, and only trained personnel are allowed to make changes to it.

This answer is automatically generated

Table of Contents

Save PDF