Connection Conditions; Operating The Co Control; Specifications And Technical Data - Infors HT Multitron Operating Manual

4.4.2

Connection Conditions

4.4.3 Operating the CO
4.4.4

Specifications and Technical Data

20 August 2020
The CO content in the incubation chamber is measured and regu-
2
lated using a CO
back wall of the incubation chamber.
The in-house gas supply and connecting hose must meet the follow-
ing requirements:
Gas supply
Constant input pressure not exceeding 0.5 bar (± 0.1)

Only use clean, dry, oil and dust free gas.

Hoses
Use only pressure-resistant and intact hoses.

The hose must have an appropriate diameter; an adapter may

be used, if necessary.
Secure hoses using appropriate clamps.

Control
2
The CO control is operated using the
2
numeric display shows the actual value in
prevent large amounts of CO
activated automatically while the door is open.
For a detailed description of how to set and activate the parameters,
see chapter 7.4 "Adjusting, Activating and Deactivating Parameters",
page 90.
For a detailed description of the technical data and possible CO
ues, see chapter 12.5.5 "CO
Multitron - Operating Manual
sensor. This is mounted on the right side of the
2
CO
from escaping, the CO
2
Control", page 150.
2
Options
parameter. The top alpha-
2
% CO
with the symbol
2
control is de-
2
val-
2
Page 49 of 158
. To