Adjusting, Activating And Deactivating Parameters; Overview About The Parameters - Infors HT Multitron Operating Manual

Multitron - Operating Manual
Operation

7.4 Adjusting, Activating and Deactivating Parameters

7.4.1

Overview about the Parameters

Page 90 of 158
Has the device been turned on via the power switch and is the initiali-
sation process terminated, the device is ready for getting pro-
grammed.
Temperature (Temp)
temperature
The parameter
delivery.
When entering the setpoint value for the temperature it is shown in
degrees Celsius with an accuracy of one decimal place.
INFORMATION
Which temperatures can effectively be reached depends on various
factors, like the ambient temperature, the ventilation or the tem-
perature of the other device in a stack.
Carbon dioxide concentration (CO
carbon dioxide concentration
The parameter
to the standard scope of delivery and therefore it is only available if
the according option is installed.
When entering the setpoint value for the carbon dioxide concentra-
tion it is shown in percent with an accuracy of one decimal place. If
the parameter is not installed, the display remains empty.
Light intensity (Light)
light intensity
The parameter
scope of delivery and therefore it is only available if the according op-
tion is installed.
When entering the setpoint value for the light intensity it is shown in
percent.
If the parameter is not installed, the display remains empty.
Temp
( ) belongs to the standard scope of
)
2
CO
( ) does not belong
2
Light
( ) does not belong to the standard
20 August 2020