Clamps And Other Holders - Infors HT Multitron Operating Manual

Schott Duran glass Erlenmeyer flask
®
25 to 750 mL
1000 mL
2000 mL
3000 mL
5000 mL
Corning plastic Erlenmeyer flask
125 to 3000 mL
Corning plastic Fernbach flask
3000 mL

5.2 Clamps and Other Holders

20 August 2020
INFORMATION
Due to limited resistance to disinfectants as well as the risk of un-
intentional detaching of flasks, Sticky Stuff is not suitable for culti-
vating pathogenic microorganisms.
Maximum rotation speed with Sticky Stuff
To ensure that the flasks do not detach from the adhesive matting,
the maximum permissible speed is limited when using adhesive mat-
ting.
INFORMATION
The following guidelines only apply to undamaged, completely dry
adhesive matting and flasks free of grease. If old or dirty adhesive
matting is used, there is a risk that flasks detach even at lower
speeds.
Filling
25 mm throw
20 % 250 min
20 % 300 min
20 % 300 min
20 % 350 min
20 % 300 min
Filling
25 mm throw
20 % 300 min
Filling
25 mm throw
20 % 300 min
For individual fitting of the universal table tray, various clamps and
holders are available.
Multitron - Operating Manual
Maximum permissible speed
200 min
-1
-1 250 min
-1 250 min
-1 300 min
-1 250 min
Maximum permissible speed
-1 200 min
Maximum permissible speed
250 min
-1
Accessories
50 mm throw
-1
-1
-1
-1
-1
50 mm throw
-1
50 mm throw
-1
Page 65 of 158