Additional New Parameters For Controllers - Yamaha CP88 Supplementary Manual

Additional new parameters for controllers

[SETTINGS] → Selecting the Controllers with encoder dial → [ENTER]
The menus under the Controllers have been changed to Bend Range, Modulation Lever, Foot Controller 1, Foot Controller 2
and Receive SW, and parameters have been added.
Controllers
Function name
Bend Range
Piano
E.Piano
Sub
Modulation Lever
Assign
Limit Low
Limit High
P.Mod Depth
P.Mod Speed
Description
Determines the maximum Pitch Bend Range in semitones for each
Voice section.
Settings: -24 – +0 – +24
Default: +2
MIDI control change numbers generated by operating the Modulation
Lever.
Default: 1 (Modulation)
NOTE
You can now assign the USB Audio Volume to the Modulation Lever.
Determines the upper and lower limits for the control change values
generated by operating the modulation lever.
Determines the depth of vibrato effect on keyboard sound. This can be
Piano
set individually for each Voice section.
E.Piano
Settings: 0 – 127
Sub
Piano/E.Piano default: 0
Sub default: 10
NOTE
Since the vibrato effect is disabled when a "Rotary" effect of the Sub
section is selected, this setting will also be disabled.
Determines the speed of the vibrato effect on the keyboard sound, and
Piano
can be set individually for each Voice section.
E.Piano
Settings: -64 – +63
Sub
Default: 0
NOTE
Since the vibrato effect is disabled when a "Rotary" effect of the Sub
section is selected, this setting will also be disabled.
CP88/73 Supplementary Manual 10