5
Use the [–/NO] and [+/YES]
buttons to select the destination
disk.
6
Press [ENTER].
Disk copy of the source disk begins.
If the destination disk is a floppy disk, the
following display appears. Eject the source
disk if the source disk is a floppy disk, then
insert a formatted destination disk.
Note1: Make sure that the destination disk is
formatted and its erasure protection tab
is set to “unprotected”. See “Formatting
Disks” and “Floppy Disk Accidental
Erasure Protection” on page 61. If the
destination disk has not been formatted
in the Disklavier, the message
“UNFORMATTED DISK” appears. In
this case, cancel the song copy process
and format the disk.
Note2: If the destination disk differs from what
was specified, the message “WRONG
DESTINATION DISK. INSERT 2DD
DISK” or similar appears. Insert the
correct destination disk to continue, or
press [STOP] to cancel disk copy.
Note3: If the destination disk contains songs,
the message “DELETE SONGS ON
DEST. SURE?” appears. Press [+/YES]
if it is okay to erase the contents of the
destination disk and continue, or
[–/NO] to cancel disk copy.
Note4: When copying between the same
medium (ex. from 2HD to 2HD), the
contents are copied from track to track.
When copying between different media
(ex. from 2DD to 2HD), the contents
are copied from file to file.
Page 47