Keysight Technologies CX3300 Series User Manual page 5

Ease of use with high performance
Two operation modes; Scope mode and Data Logger mode (option STG)
•
Two or four analog input channels with various wide-range and high-resolution
•
sensors
Front-panel interface provides easy access to the controls needed for
•
time-domain waveform analysis tasks.
Large capacitive touch screen display allows the instrument operation without
•
an external pointing device.
User interface with icons, windows, dialog boxes, and toolbars provides easy
•
access to dozens of configuration and analysis tools, ensuring you can set up
and make the most complex measurements.
Current Waveform Analytics Software used on an external PC for post
•
measurement offline data analysis (Keysight CX3300APPC)
Front-panel interface
Run control (Run/Stop and Single) starts waveform acquisition or make a
•
single acquisition in the Scope mode. It starts or stops waveform recording in
the Data Logger mode.
Horizontal control sets sweep speed and trigger position, also adjusts
•
horizontal scale.
Auto Scale acquires waveform and sets the optimum scale automatically.
•
High Reso selects the 16-bit vertical resolution mode for the all analog
•
channels.
Clear Display clears the waveforms on the screen before one or more
•
acquisitions.
Default Setup sets initial configuration.
•
Trigger control sets trigger source, sweep mode, trigger conditions, and
•
trigger level for synchronization with the observing waveform.
Vertical control for adjusting vertical scale
•
Color-coded key's LED indicates if the channel is active or not.
•
LEDs indicate if the channel is controllable or not.
•
Zoom activates the Zoom window.
•