Keysight Technologies CX3300 Series User Manual page 98

Performing User Calibration
Using the CX1104A
Figure 3-5
After the channel passed the user calibration, the ON/OFF switch will be available.
•
•
If the channel failed the user calibration, the ON/OFF switch is not available. Error
correction is not performed.
Once you disconnect the CX1104A from the CX3300, the user calibration data for
this channel will be cleared.
98
Connection Diagram for User Calibration (CX1104A)
CX3300
Extension cable
Set ON to enable error correction.
Error correction is performed for the data measured by this channel from now
on.
Set OFF to disable error correction.
Error correction is not performed.
Resistive sensor head
(CX1211A CX1212A, CX1213A,
CX1214A CX1215A
CX1104A
Keysight CX3300 User's Guide, Edition 5
CX1216A)