Table of Contents
Advertisement
Safety Information
Safety Summary
Safety Summary
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual may impair the
protections provided by the instrument. In addition, it violates safety standards of
design, manufacture, and intended use of the instrument. Keysight Technologies
assumes no liability for the customer's failure to comply with these requirements.
Product manuals may be provided on CD-ROM or in printed form. Printed manuals
are an option for many products. Manuals may also be available on the Web. Go to
www.keysight.com
the top of the page.
Do not use this instrument in any manner not specified by the manufacturer. The
protective features of this instrument may be impaired if it is used in a manner not
specified in the operation instructions.
This instrument is an INDOOR USE product.
This instrument complies with OVERVOLTAGE CATEGORY II for mains input and
POLLUTION DEGREE 2 defined in IEC 61010-1.
If an instrument is marked CAT I (IEC Measurement Category I), or it is not marked
with a measurement category, its measurement terminals must not be connected
to line-voltage mains.
Safety of any system incorporating the equipment is the responsibility of the
assembler of the system.
104
and type in the product model number in the Search field at
Keysight CX3300 User's Guide, Edition 5
Advertisement
Table of Contents
