Table of Contents
Advertisement
Performing User Calibration
Using the CX1151A
Figure 3-7
After the channel passed the user calibration, the ON/OFF switch will be available.
•
•
If the channel failed the user calibration, the ON/OFF switch is not available. Error
correction is not performed.
Once you disconnect the CX1151A from the CX3300, the user calibration data for
this channel will be cleared.
102
Connection Diagram for User Calibration (CX1151A)
CX3300
CX1151A adapter
BNC cable
(furnished with CX3300)
Set ON to enable error correction.
Error correction is performed for the data measured by this channel from now
on.
Set OFF to disable error correction.
Error correction is not performed.
Keysight CX3300 User's Guide, Edition 5
Advertisement
Table of Contents
