Keysight Technologies CX3300 Series User Manual page 89

Figure 3-1
After the channel passed the user calibration, the ON/OFF switch will be available.
•
•
If the channel failed the user calibration, the ON/OFF switch is not available. Error
correction is not performed.
Once you disconnect the CX1101A/CX1102A/CX1103A from the CX3300, the user
calibration data for this channel will be cleared.
Keysight CX3300 User's Guide, Edition 5
Connection Diagram for User Calibration (CX1101A/CX1102A/CX1103A)
CX3300
Set ON to enable error correction.
Error correction is performed for the data measured by this channel from now
on.
Set OFF to disable error correction.
Error correction is not performed.
Using the CX1101A/CX1102A/CX1103A
CX1101A/CX1102A with CX1203A
or
SMA-to-BNC adapter
CX1103A
(furnished with
current sensor)
BNC cable
(furnished with CX3300)
Performing User Calibration
89