Using the CX3300
Rear Panel Overview
4. 10 MHz Out
5. Digital D7-D0
6. Serial number
7. AC power input
8. Security cable slot
9. Cooling fan
10. Strap handle
46
Frequency: 10 MHz 10 ppm (typical)
•
BNC connector used to send the reference clock for the horizontal timebase
system of an external equipment. The specifications of the reference clock are
as follows.
Frequency: 10 MHz 5 ppm (typical)
•
Level: 0 dBm 3 dB into 50 (typical)
•
Output impedance: 50 nominal
•
For the CX3324A. Connects the CX1152A digital channel interface cable which
provides eight digital channels D0 to D7 and the ground line. Supplemental
characteristics are listed below.
Maximum input voltage: 40 V
•
Input dynamic range: 25 V
•
Input impedance: 10 M
•
Maximum sampling rate: 0.5 GSa/s
•
You need this serial number when using Keysight Technologies telephone
assistance program.
AC power cord is connected to this receptacle.
Keysight CX3300 User's Guide, Edition 5