Performing User Calibration
Using the CX1105A
Figure 3-6
After the channel passed the user calibration, the ON/OFF switch will be available.
•
•
If the channel failed the user calibration, the ON/OFF switch is not available. Error
correction is not performed.
Once you disconnect the CX1105A from the CX3300, the user calibration data for
this channel will be cleared.
100
Connection Diagram for User Calibration (CX1105A)
CX3300
Test adapter
CX1105A
Set ON to enable error correction.
Error correction is performed for the data measured by this channel from now
on.
Set OFF to disable error correction.
Error correction is not performed.
CX1105A
Leave the BNC
connector open.
Insert
Test adapter
Keysight CX3300 User's Guide, Edition 5
Slide switch can be set
on either side.