Scanning Scan Body - Planmeca FIT CAD System User Manual

12.17 Scanning scan body

User's manual
After having defined the restoration site to be scanned in the
the software automatically shows the correct jaw (upper or lower to be
scanned).
1. Start scanning the occlusal surface of the jaw in which the implant is
placed. Scan buccal and lingual surfaces.
Make sure you have properly scanned the approximal contacts and the
emergence profile.
2. Evaluate the model and make adjustments as needed.
3.
Select Scan Body scan type.
Setup screen,
Planmeca FIT CAD/CAM system
12 Scanning
71