Planmeca FIT CAD System User Manual page 16

4 Safety precautions
8 Planmeca FIT CAD/CAM system
WARNING
While using the PlanScan scanner avoid eye exposure. LEDs contained in
this device pulse at a frequency that may elicit reactions in sensitive
individuals. These reactions may include seizures.
CAUTION
Medical electrical equipment requires special precautions regarding EMC
(Electromagnetic Compatibility). The Planmeca products must be installed
and placed into service according to the EMC information provided in the
documentation that accompanies the Planmeca products.
CAUTION
Portable and mobile RF (Radio Frequency) communications equipment can
affect medical electrical equipment.
CAUTION
After using the scanner on a patient, clean the scanner according to the
cleaning instructions found in section "Cleaning / preventive maintenance"
on page 161.
CAUTION
Do not hold the scanner in a way that will cover the cooling vents.
CAUTION
Do not immerse the scanner base in liquid or expose the Planmeca products
to conditions outside the operating conditions, see section "Technical
specifications" on page 165 Clean the scanner according to the instructions
in section "Cleaning / preventive maintenance" on page 161.
CAUTION
Do not stack the tips near or on any other metal instruments.
CAUTION
Ensure your Planmeca products are properly maintained, see section
"Cleaning / preventive maintenance" on page 161.
CAUTION
If you suspect equipment malfunction or failure, discontinue using the
Planmeca products and contact Planmeca Technical Support immediately.
Do not attempt to make any repairs on the products.
CAUTION
Read and comply with all safety, warning, and instructional labels on the
Planmeca products.
CAUTION
If the scanner has been operational for an extended period of time, the
surface may become warm to the touch. If the temperature becomes too
warm to the touch within a minute of use, turn it off and allow it to cool.
User's manual