User's manual
•
Pre-op - For using the patient's existing dentition or a wax-up as the pre-
op model for creating the restoration.
•
Upper jaw
•
Lower jaw
•
Buccal - For scanning the buccal view of the jaws in occlusion.
•
Bite - For defining the occlusal anatomy of a bite registration. This button
is active when bite registration is selected.
•
Scan Body - For scanning the scan body on a dental implant.
NOTE
When using Planmeca Emerald scanner you can move between the scan
tabs by pressing the bottom button of the scanner. The scanned model will
be generated automatically when moving to the next scan tab.
Planmeca FIT CAD/CAM system
12 Scanning
45