Scanning; Scan Tab - Planmeca Chairside PlanScan User Manual

15 SCANNING

15 SCANNING

15.1 Scan tab

15.1.1 Scanner tip total usage and session usage time counter
40 Planmeca Chairside CAD/CAM solution
1. Scan type selection tools (see section 15.2 "Scanning
2. Scanner tip total usage time counter
3. Accuracy optimization slider
4. Model editing tools
5. View editing tools
6. Alignment tools
7. View modes
1.
2.
3.
The scan tab contains the following elements:
overview" on page 42.
The scan type selection tools can also be used with the
dental unit foot control. For detailed information see your
dental unit's User's manual.
4.
When laser is activated the total usage time for individual
tips is shown on the lower left corner of the screen. The
session usage counter shows the usage time for the
ongoing scanning session
To reset the counter to zero click the Reset button.
5.
6.
7.
User's manual