Planmeca FIT CAD System User Manual page 38

9 Setting up restoration
30 Planmeca FIT CAD/CAM system
7. Select shade for the restoration.
The shade is shown in the milling unit instructions along with the material
and block size.
8. If setting up a bridge, select all the teeth you want to use for the bridge
by clicking on the tooth numbers.
9. Select the correct restoration type (crown or pontic).
10. Link the restoration as a bridge by clicking the Link button and then
clicking on the first and the last tooth of the bridge.
11. Proceed to scanning by clicking the Scan tab button.
User's manual