Planmeca FIT CAD System User Manual page 21

User's manual
1. Insert the USB-C cable into a USB 3 port on the laptop.
All the ports on Planmeca laptop are USB 3. If you are not using a laptop
provided by Planmeca, refer to your laptop's user's manual to find the
USB 3 port.
2. When the scanner is not in use disconnect the cable from the laptop by
grabbing on the connector.
CAUTION
Do not pull on the cable itself to disconnect. Bending or twisting the
cable may impact system usability.
You do not need to detach the USB device from Windows.
6 Scanner setup
Planmeca FIT CAD/CAM system 13