Planmeca FIT CAD System User Manual page 67

User's manual
The preparation and buccal bite model appear.
• If the preparation is an upper tooth, the preparation model appears at
the top of the screen.
• If the preparation is a lower tooth, the preparation model appears at
the bottom of the screen.
2. Look for a distinctive feature on both models.
3. Click directly on a distinctive feature in the buccal bite and drag the
model until the pointer is directly over the same distinctive feature on the
preparation model.
As you drag the buccal bite model down, it will disappear behind the
preparation model. It is important to know the point that you grabbed and
drag it to the same point on the preparation model.
Distinctive features can include a cusp tip, groove, unique gingiva, etc.
Do NOT click on smooth/round parts of the model or the model base.
Planmeca FIT CAD/CAM system
12 Scanning
59