Introduction; Indications For Use; Software And Hardware Upgrades - Planmeca FIT CAD System User Manual

1 Introduction

1.1 Indications for use

Contraindications

1.2 Software and hardware upgrades

User's manual
The Planmeca FIT system is a complete optical impression system for
CAD/CAM of dental restorations intended for dental offices or laboratories.
The system comprises a digital impression scanner (Planmeca Emerald S,
Planmeca Emerald or Planmeca Planscan) Planmeca PlanCAD Easy
software module and Planmeca PlanMill 40 S and 30 S milling units.
The scanner takes digital impressions which can be used in different digital
workflows in Planmeca Romexis or exported to a third party.
NOTE
The Planmeca PlanMill 40 S and 30 S milling units have separate user's
manuals.
NOTE
The Planmeca impression system is not indicated for orthopaedics or any
indication beyond dentistry.
This manual is valid for Planmeca Romexis software revision 5.3.2 or later.
NOTE
The Planmeca PlanCAD Easy is available under license.
NOTE
Some of the screenshots may have been taken in earlier software versions
and may not exactly match your screen.
NOTE
FOR US USERS: Federal law restricts the scanner to sale by or on the order
of a health care professional.
NOTE
Throughout the manual, important notes and items of interest are formatted
like this example.
The Planmeca FIT system is an optical impression system for computer-
aided design and manufacturing of dental restorations. It is used for
recording topographical characteristics of teeth, dental impressions, or stone
models by digital methods for use in computer aided design and
manufacturing of dental restorative prosthetic devices.
The system is not indicated for orthopaedics or any indication beyond
dentistry.
System software and hardware upgrades are initiated through Planmeca
only. No software or hardware should be added to or deleted from the
Planmeca systems without prior approval of Planmeca. Doing so may result
in damage to the system and will void the product warranty.
1 Introduction
Planmeca FIT CAD/CAM system 1