Margin ramp
Spacer thickness
Dropper tool
User's manual
(For design systems) Default: 0.25
Default setting for the margin ramp incline. Use the slider or type a number
in the box to change the setting.
Increasing the margin ramp decreases the space between the restoration
and preparation at the shoulder.
Decreasing the marging ramp increases this space.
(For design systems)
The default setting for the space between the preparation and the
restoration:
•
Top: 0.1
•
Sides: 0.1
(For design systems)
18 Functions in Planmeca Romexis
Planmeca FIT CAD/CAM system
147