Planmeca FIT CAD System User Manual page 87

User's manual
3. Select Upper or Lower if not already selected.
NOTE
Do NOT select Scan Bite Registration, which resembles an impression.
4. Use the same scan pattern as for intraoral or model scan.
NOTE
From the occlusal view, the impression can give the optical illusion of
looking like a regular model.
5. Rotate the model to see all of the impression. Be sure to check the
contact areas on the proximal teeth.
You can use the Data Density View to be sure there is enough data.
6. If there are areas that need additional scans, such as the mesial
interproximal area, take extra scans.
7. Click Data Density View to deactivate it.
8. Click Impression Mode.
Planmeca FIT CAD/CAM system
12 Scanning
79