Planmeca FIT CAD System User Manual page 144

16 Customizing restoration design
136 Planmeca FIT CAD/CAM system
1. Start mirroring in the
Scan tab select the Pre-op scan type.
2. In the
3. Scan the prep and the desired contra-lateral dentition.
4. Copy the pre-op model as the prep model using the time saver option.
5. Scan the opposing and buccal views.
6. Orientate models (see section "Orientating models" on page 81) and
define the margin (see section "Defining margin" on page 93).
7. Select pre-op editing tool and designate the anatomy of the contra-lateral
dentition to copy.
Setup tab by selecting PreOp Library.
User's manual