View Bite Registration, Opposing Model, Or Pre-Op - Planmeca FIT CAD System User Manual

16.6.5 View bite registration, opposing model, or pre-op

User's manual
To view the cross section, rotate the image.
To view the measurement represented by the grid lines, click the Slice Plane
button.
Zoom in to decrease and zoom out to increase the measurement
If a bite registration, opposing model, or pre-op was scanned, it can be
viewed anytime during design.
1. Click View Pre-op
or
View Bite Registration.
To view the opposing model, click View Bite Registration.
16 Customizing restoration design
Planmeca FIT CAD/CAM system 127